1. Dodge Charger
  2. Owner info
  3. Owner’s manuals
  4. 2019
  5. FLEXIBLE FUEL (3.6L ENGINE ONLY)

2019 Dodge Charger Owner’s Manual — FLEXIBLE FUEL (3.6L ENGINE ONLY)

TECHNICAL SPECIFICATIONS

E-85 General Information

The information in this section is unique for Flexible Fuel vehicles only. These vehicles can be identified by a unique fuel filler door label that states Ethanol (E-85) or Unleaded Gasoline Only and/or a yellow fuel cap. Please refer to the other sections of this manual for information on features that are common between Flexible Fuel and Non-Flexible Fuel powered vehicles.

    is a mixture of approximately 85% ethanol and 15% unleaded gasoline.

If your vehicle is E-85 compatible, it will operate on unleaded gasoline with any octane rating greater than 87 (R+M)/2, or solely E-85 fuel, or any mixture of these fuels.

For best results, avoid fueling patterns alternating be- tween E-85 and unleaded gasoline.

When switching fuel types:

    Add 5 gallons (19 liters) or more when refueling.

Drive the vehicle immediately after refueling for at least 5 miles (8 km).

Observing these precautions will avoid possible hard start- ing and/or driveability problems during warm up.

(Continued)

NOTE:

Use seasonally adjusted E-85 fuel (ASTM D5798). With non-seasonally adjusted E-85 fuel, hard starting and rough idle following start up may be experienced even if the above recommendations are followed, especially when the ambient temperature is below 32 °F (0 °C).

Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as Mopar Injector Cleanup or Techron may be used.

Starting

The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0 °F (-18 °C). In the range of 0 °F (-18 °C) to 32 °F (0 °C), an increase in the time it takes for your engine to start may be experienced, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. These issues may be improved with the use of seasonally adjusted E-85 fuel.

NOTE: Use of the engine block heater (if equipped) may improve engine start time when using E-85 fuel when the ambient temperature is less than 32 °F (0 °C).

(E-85) And Gasoline Vehicles

Because E-85 fuel contains less energy per gallon/liter than 9

FFV vehicles operated on E-85 require specially formulated engine oils. These special requirements are included in Mopar engine oils, and in equivalent oils meeting FCA US Material Standard MS-6395. It is recommended that engine oils that are API Certified and meet the requirements of Material Standard MS-6395 be used. MS-6395 contains additional requirements, developed during extensive fleet testing, to provide additional protection to FCA US LLC engines.

gasoline, an increase in fuel consumption will be experi- enced. The miles per gallon (mpg)/kilometers per liter and the driving range will decrease by approximately 30%, compared to gasoline operation.

All fuel and engine components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with ethanol. Ethanol compatible service components are required.

All 2019 sections

Stored owner’s manualImported HTML from the shared Autotk manuals tables. Not an official Toyota site.